6
e
Glide
Trainer
CG
800
1. Attach the transport wheels (
79
) with two bolts (
44
) and two nuts (
45
).
2. Unpack the console and install the 3 AA batteries. Connect the speed sensor wire into the white two pin
connector accessed through the opening in the back of the console. Mount the console onto the console mast
plate and secure with four screws (
59
).
3. Secure the two bottle holders (
98
) to the console mast with four screws (
59
). Snap the four end caps (
84
)
onto the cup washers on the left & right pedal arm assemblies.
#
44
. 5/16” x 1-3/4”
Bolt
#
45
. 5/16”
Nut
#
59
. M5 x 10mm
Phillips Screw
HARDWARE
STEP 3:
Console, Wheels & End Caps
