Customer Service 1-888-707-1880
Dyaco Canada Inc.2019
Email:
9
A
ssembly &
S
etup
UNPACKING
AND
PARTS
1. Cut the straps then lift the box over the unit and unpack. Remove all parts from the shipping carton and foam inserts, and verify that
all parts are included in your shipment:
2. Locate the hardware package. The hardware is separated into four steps. Remove the tools first. Remove the hardware for each
step as needed to avoid confusion. The numbers in the instructions that are in parenthesis (#) are the item number from the
assembly drawing for reference.
NOTE:
All tools required to assemble the bike are included within the packaging, except for a Rubber Mallet, which is recommended
when assembling the pedals onto the bike.
Take time now to enter your Air Bike
serial number in the space below (serial number is located on the center floor tube behind the
crank.
Serial No._____________________________________________
NOTE:
If you are missing any of the parts listed above, inspect the packing material and the box for items that may have been
overlooked.
CAUTION:
Damage to the bike during assembly is not covered as part of the limited Spirit Fitness warranty. Take care not to drop or
lean the bike on its side. Carefully stand the bike up in the normal upright position on a stable surface so it will not tip over during
assembly.
Protect the environment by not disposing of this product with household waste. Check your local authority or approved waste center
for recycling advice and facilities.
A
ssembly Tools
#100.
14/15mm
Wrench (1 pc)
#93.
Phillips Head
Screwdriver
(1 pc)
#126.
M4 L Allen
Wrench
(1 pc)
#94.
10mm Wrench
(1 pc)
#95. No.
22 x190mm
Wrench (1 pc)
