Customer Service 1-888-707-1880
Dyaco Canada Inc.2019
Email:
20
Console Setup
Battery Installation
The console operates on 4*AA batteries (not included). The battery compartment is on the back side of the console.
Setting Metric & Imperial Units
– Setup Mode
The default setting is in Imperial Units (mph).
In the Ready Mode press and hold the START and ENTER keys for two (2) seconds until distance shows and flash and then press
ENTER. KM or M is now
flashing, pressing ▲ or ▼ to select metric (KM) or imperial (M) units, and then press ENTER to confirm.
Programming
Sleep Mode
After 60 seconds of inactivity, the console will switch into the power-saving Sleep Mode. The display will switch off. Rotating the
pedals or pressing any button on the console will launch the Ready Mode.
Ready Mode
The Ready Mode informs the user that the console is powered on and ready to enter into any mode. After a period of 60 seconds of
inactivity the console will switch into the Sleep Mode.
Pause Mode
During any mode of operation, pressing the START key will launch the Pause Mode for 5 minutes. The console will beep every 30
seconds and the display will flash, to remind that the console is in Pause Mode. If there is no activity within the 5 minute period of
Pause Mode, the console will switch into Ready Mode.
To exit the Pause Mode and continue the current program, press the START key.
To quit the paused program at any time, press the STOP key to launch the Ready Mode.
Workout Summary
The console provides a brief workout summary after completed the workout.
Data displayed includes: Total Time, Total Distance and Total Watts.
Reset Process
To reset all saved settings (except the metric or imperial units setting), press and hold the STOP for 2 seconds then press ENTER.
