Spirax Sarco UIB45 Installation And Maintenance Instructions Manual Download Page 5

IM-P113-04 

CMGT Issue 2

5

UIB45 Sealed Inverted Bucket Steam Trap for use with Pipeline Connectors

1.13  Residual hazards

In normal use the external surface of the product may be very hot. If used at the maximum 

permitted operating conditions the surface temperature of the product may reach temperatures 

up to 425 °C (797 °F). 

Many products are not self-draining. Take due care when dismantling or removing the product from 

an installation (refer to 'Maintenance instructions').

1.14 Freezing

Provision must be made to protect products which are not self-draining against frost damage in 

environments where they may be exposed to temperatures below freezing  point.

1.15 Disposal

Unless otherwise stated in the Installation and Maintenance Instructions, this product is recyclable 

and no ecological hazard is anticipated with its disposal providing due care is taken. 

1.16  Returning products

Customers and stockists are reminded that under EC Health, Safety and Environment Law, when 

returning products to Spirax Sarco they must provide information on any hazards and the precautions 

to be taken due to contamination residues or mechanical damage which may present a health, 

safety or environmental risk. This information must be provided in writing including Health and 

Safety data sheets relating to any substances identified as hazardous or  potentially  hazardous.

Summary of Contents for UIB45













Reviews: