IM-P323-25 CH Issue 3
36
The configuration of the controller is
specified through a 4 digit code that
defines the type of input, of control
output and of the alarms.
(section 4.1 page 19).
5.6 Configuration menu
Press
or
to display
the next parameter or the next
code and change its value.
The new value entered is stored
into the controller when the next
parameter is selected by
pressing
.
Pressing the
will display
the next group of parameters.
Operator
mode
Auto / Man
selection
(see page 25)
Control output
selection
(only if installed)
non
£
Not used
N
.
U
Heat
N
.U.
C
Cool
Change password [2]
To change the password
from 0...9999
33
default from factory
Note:
You must remember
the password code.
If the code is changed
from
33
, and the operator
forgets the code,
he will be locked out
of the controller.
