IM-P145-02
ST Issue 2
6
2. General product information
Fig. 2 FTS14-C (R-L) - Flanged
Fig. 3 Section of the main valve
assembly - DN25 (1") only
Fig. 1 FTS14X -
Screwed (vertical down)
2.1 General description
The FTS14 is an austenitic stainless steel ball float steam trap with an integral automatic air vent.
It provides efficient condensate drainage and prompt air removal to ensure process equipment
operates to its maximum potential.
As standard the FTS14 has horizontal connections with flow from right to left (R-L). However
its unique design allows the cover to be simply rotated to provide horizontal left to right (L-R)
and vertical up or vertical down configurations.
Standards
This product fully complies with the requirements of the European Pressure Equipment
Directive 97 / 23 / EC.
Certification
This product is available with certification to EN 10204 3.1. Note: All certification/inspection
requirements must be stated at the time of order placement.
Optional extras
FTS14X
is available with an integral strainer screen to protect the internals from dirt.
FTS14-C
is a combined steam lock release (SLR) valve and thermostatic air vent. This is used
on applicatons where steam locking can occur. See Section 3.11.
The trap can also be supplied with optional tapping in the cover to take a suitable temperature
sensor such as a PT100. Thread size is " BSP and is supplied with a stainless steel plug fitted.
Note:
For additional product information see the Technical Information Sheet TI-P145-01.
Summary of Contents for FTS14
Page 2: ...IM P145 02 ST Issue 2 2 ...
Page 12: ...IM P145 02 ST Issue 2 12 ...
