Installing the PaulyWinder
Place the back of the PaulyWinder (screw hole) into the flyer hole and attach to the
flyer using the screw provided with your installation kit. Do not use power tools, as they
may strip the plastic.
Installing the Balance Bar
After installing the PaulyWinder bar you will install the balance bar. Install the balance
bar so that it is to the left of the PaulyWinder as pictured. Note that the front of each
PaulyWinder flyer bar has a magnet with a flat “key” that fits into your orifice. Install
the Balance bar so that the “key” is facing upward so your orifice bar will attach to it.
Aligning the Flyer
After installing the PaulyWinder, align it by putting the orifice bar on. You may need to
twist either the PaulyWinder or the balance bar to get the orifice bar to snap into place