HMP Pull Mode
Firmware 3.0, version 1.0
15
been modified since, will not be uploaded. Files that are present on the device but not on
the server will be removed from the local storage. At the end of a successful publish
action, the content of the device is an exact copy of the content on the server.
This action uses the following fields:
Title
= publish
Location
= URI of the WebDAV server or URI of the XML description of your
server as explained in HTTP server.
Description
: additional option for the publish process
-deletelast: By default, the pull mode starts by deleting file present on the
device but not on the repository, then it download the new file. This
saves space on the device. When this option is specified, the files
are deleted only once all the files have been uploaded to the device.
-dest
folder
Change the destination folder used by the publish. By default
content is published in the root folder. If a
folder
is specified, the
content will be published in the given folder.
Notes:
If the folder do not exist, it will be created.
When fusion is enabled the folder 'publish' should be used, as
project can no longer be published in the root folder.
Need firmware 2.2.3
-norecurs
Prevent recursion during the publish process. Only the root folder
(or the folder specified by the -dest option) will be modified. No
sub-folders will be created or deleted.
The duration of the publish action is important in case of errors while downloading files.
If an error occurs in downloading one file or that the server cannot be reached, the pull
mode will retry the downloading process for the duration of the event.
Example of an ICS file for a publish process:
