© 2013 SpinetiX S.A. All rights reserved.
12
</
multistatus
>
</
projects
>
Configuring the HMP
There are two ways to configure the Pull mode on a HMP unit:
Using manual settings. This option is easy to configure, but has some limitations.
For example, it forces a daily project publishing at a specific time. Moreover, the
options for uploading logs are limited.
Using iCalendar schedule files: This option gives you full control over the Pull
mode of the HMP, but requires an external tool to create iCalendar files.
Both alternatives are controlled using Control Center and the Pull Mode settings.
