SPIERINGS SK597-AT4, Manual

Page: 238 / 256

SK597-AT4
Drive line
Truck
11-14 SPIERINGS MOBILE CRANES USER MANUAL V 1.2
M
ei
2
0
1
8
C
h
a
n
g
e
s
a
n
d
t
y
p
o
g
ra
p
h
ic
a
l e
rr
o
rs
r
e
s
e
rv
e
d
.
©
2
0
1
8
S
p
ie
ri
n
g
s
M
o
b
ile
Cr
a
n
e
s
–
A
ll r
ig
h
ts
r
e
s
e
rv
e
d
.
11.5.2. Tyre pressure
1. Check the tyre pressure at cold tyres. The values of the tyre pressure are shown in
§ 3.9.2.4. Main screen: Tyre pressure screen (when ignition is on).
In Table 11-2 the prescribed values for several brands are shown.
Reading Annex 5 for information of the supplier is strongly recommended;
2. Use compressed air to bring the cold/cooled tyre at the proper pressure (see Table 11-2 );
3. Mount the valve cap with the correct sealing ring on the valve.
Tyre brand
Tyre pressure [bar]
(measured at cold tyres)
Goodyear Omnitrac 445/75 R22.5 170J 9.0
Windpower 445/75 R22.5 WR12 9.0
Michelin 445/65 R22.5 XZY-TL-168K
9.2
The various indicators in the display indicate the status of the tyre pressure.
At a low/high tyre pressure the yellow indicator appears; at a too low/too high tyre pressure the red
indicator appears ( Picture 11-12 ). If the tyre pressure is OK , the indicator is missing on the dashboard.
11.6. Brake pads
It is recommended to have the brakes tested on a brake analyser every year.
Worn brake pads
If this orange symbol lights up, the brake pads of the concerned axle should be checked for wear.
The number in the symbol indicates the axle number.
For maintenance and repairs please refer to the
document “Kessler axles” in
Annex 8 .
CHECK / TEST!
Check the brake pads during maintenance or at least once a year at normal
operating condtions.
CAUTION!
It is harmful for the tyres to have a tyre pressure below 9.0 bar!
Check the tyre pressure daily.
Picture 11-12
Table 11-2