Operator
’s Manual – Spider CROSS LINER
32 / 64
EMERGENCY SITUATIONS WHEN WORKING ON THE STABILIZING WINCH
EMERGENCY SITUATION
RECOMMENDED SOLUTIONS
A rope or anchor is suddenly
released
Turn the wheels immediately so that they are perpendicular to the slope (across to
the slope), stop the movements. Find a new anchor point. Press the STOP button
on the remote control.
Rope breaks
Turn the wheels immediately so that they are perpendicular to the slope, stop the
movements. Press the STOP button on the remote control. Use the new rope.
Adding any extensions to the rope is prohibited.
Bursting the carabiner
Turn the wheels immediately so that they are perpendicular to the slope, stop any
movements. Press the STOP button on the remote control. Replace defective
parts.
Speed reduction, the mower starts to
move uncontrollably and
spontaneously
Immediately increase the engine speed to max., Turn the wheels perpendicular to
the slope, stop the movements. Press the STOP button on the remote control.
Hydraulic hose breaks
Turn the wheels immediately so that they are perpendicular to the slope (across to
the slope), stop the movements. Press the STOP button on the remote control.
Unwinding the entire rope length
from the winding drum and winding in
the opposite direction on the drum
Turn the wheels in
180 ° and continue working or unwind the rest of the rope, let
the winch drum rotate and wind the rope back in the right direction. Continue
working.
Malfunction of the winding drum drive
sprocket mechanism.
Immediately turn the running wheels perpendicular to the slope, stop the
movements. Press the STOP button on the remote control. Repair the sprocket
mechanism.
Engine stops
Turn the wheels perpendicular to the slope, press the STOP button on the remote
control.
Roll over the machine
Press the STOP button on the remote control immediately.
Loss of wheel contact with ground
Press the STOP button on the remote control immediately.
Lack of fuel in the fuel tank
Turn the wheels immediately so that they are perpendicular to the slope (across to
the slope), stop the movements. Press the STOP button on the remote control and
refuel.
3.9 MOWER TRANSPORTATION
The mower is transported on a trailer or other suitable means of transport.
WARNING
Driving on public roads is prohibited.
Before proceeding with the transport of the mower, make sure that you do not violate local laws or regulations on
all areas you will be travelling through.
ATTENTION
Before loading the mower on the trailer, make sure that there is no oil, grease or ice on the trailer or
ramps. Remove any oil, grease or ice from the mower tires. Make sure the mower is not loaded on the
ramp / trailer at an inappropriate angle.
Check the condition of the transport vehicle before loading the mower onto the trailer.
When loading or unloading from a trailer, make sure that the edge - formed by the trailer floor and the ramps - is
not an obstacle for the mower with its accessories. Otherwise, you must use longer ramps to decrease the angle.
