Operator
’s Manual – Spider CROSS LINER
23 / 64
3.3 BEFORE STARTING THE ENGINE
WARNING
Before starting the engine, a check-up of the mower must always be performed. This is important both
in terms of safety (yours and others) as well as to ensure maximum durability of the mower.
1)
Turn the controller on with the
controller main switch into position 1
2)
Activate the CENTRAL STOP on
controller (by turning the CENTRAL
STOP clockwise)
3)
Unlock the CENTRAL STOP on the
mower to the ON (clockwise) position
4)
Press the activation switch on the
controller.
5)
Hold the switch to the start position
and hold it in this position until the
engine starts.
6)
After starting the engine, set the engine speed from to maximum
If the engine does not start, the mower functions are blocked. In this case, you must press the CENTRAL STOP on
controller and repeat the starting procedure from the first point.
If any of the warning lights stop signaling while the engine is running or does not shut down properly, stop the
engine as soon as it is safe.
The mower is equipped with an automatic choke for cold starts. After starting the engine, leave the mower
in position for about 2 minutes without the mowing mechanism switched on.
MAIN SWITCH
MAIN SWITCH
CENTRAL STOP
CENTRAL STOP
CENTRAL STOP
CENTRAL STOP
ACTIVATION SWITCH
ACTIVATION SWITCH
ENGINE START/STOP
SWITCH
ENGINE START/STOP
SWITCH
