SnapServer/MOBOTIX Installation Guide
10400783-001
©2016 Sphere 3D Corp.
Page 7 of 9
5.
Click the
checkered flag icon
to complete the camera setup.
The home-screen appears (yours might differ slightly):
Your cameras are now known by the MxMC software.
7. Existing Network Consideration
NOTE: If your network IP address is NOT in the range of 10.n.n.n, continue with
If your network and computer use an IP range of 10.
n.n.n
with a subnet mask other than
255.0.0.0, you need to change the camera's video storage configuration to point to the Snap
Server's IP address on your network:
1.
Identify the
IP address
of the SnapServer NAS appliance.
http://docs.overlandstorage.com/ssm
.
2.
Refer to the MOBOTIX camera manual to connect to the camera's web interface and, under
Storage configuration, change the File Server IP address from 10.0.0.254 to the IP address of
the SnapServer appliance.
The manuals can be downloaded at:
https://www.mobotix.com/eng_US/Support/Manuals/IP-
. Just select the camera version using the tabs at the top.
8. Connect Your SnapServer NAS to MxMC
By connecting the SnapServer and MxMC, you are able to retrieve your images and video
recordings directly from the NAS system for high-speed playback.
1.
Select
File > Preferences
from the MxMC menu bar.
If necessary, press the
Alt
key to display the menu.
