Installing the clean room system
3. Screw the FMS series SuSi to the profile frame.
4. Check that the profile frame is above the module frame and holds the ceiling bracket on which the ceiling
panels are positioned.
Installing a laminar flow module on the ceiling of a building
1
Ceiling attachments
1. Fit the four ceiling mountings on the ceiling of the building.
2. Secure the four ceiling attachments to the FMS series SuSi.
3. Hook the FMS series SuSi into the ceiling mountings.
4. Check that the FMS series SuSi is firmly positioned.
6.2
Installing the FMS basic
WARNING!
Risk of injury due to falling main filter
This could result in serious injury or death.
■
Undo the lock plates only when carrying out installation and maintenance.
■
Installation must be carried out by two people.
The FMS series basic can be used in the following locations:
■
As a separate filter unit on a machine
■
In combination with a clean room cell
6.0 2020
31
