Sperry Marine Rudder Angle Indicator System, Operation, Installaion And Service Manual

Page: 33 / 116

RAIS 056357/B
Initial system configuration 6-3
8. Plug in the USB cable at the PC and at the RAC’s service port.
The “Online” button should now become clickable (not greyed-out),
indicating that SUSI has found a device to connect to:
The LED icon next to the button will remain grey, as no connection
has been made yet.
9. Click to connect to the RAC.
The LED icon should now change to green and the status line should
read “Connected with RAC”.
Upon connection, SUSI populates the Application tab with the RAC
application controls and displays the application’s “Main Page”:
10. If the service PC has not previously been used to service a RAC, a
warning message will pop up, indicating that the parameter list for
the device is empty:
Click . to read the current configuration from the RAC and to
set the Main page parameter controls accordingly, or
click . if you intend to set all parameters manually in SUSI
first and write them to the RAC later.