8
9
3rd BYTE:
bit7
bit6
bit5 bit4 bit3
bit2
bit1
bit0
Auto Power Off
Memory Full
Resolution
Sign
OL
bit0:
1→main window value is OL, 0→not OL
bit1:
1→main window value is minus, 0→main window value is plus.
bit2:
1→4th byte and 5th byte represent #### , 0→4th byte and
5th byte represent ###.#
bit6:
1→Memory is full. 0→Memory is not full.
bit7:
1→Auto power off enabled. 0→Auto power off disabled.
Setup ThermoLog (Thermo DataLogger)—
RS232 interface software:
The ThermoLog package contains:
• Two 3.5” diskettes
• Custom designed RS232 cable for THERMOLOG.
System Required:
• Windows 95 or Windows 98 or Windows NT 4.0 above.
Minimum Hardware Required:
• 486-100 MHz PC compatible, 16 MB RAM; At least 5 MB
hard disk space available to install THERMOLOG program.
Recommended display resolution is 800X600.
4th BYTE:
first two BCD code of main window value.
5th BYTE:
last two BCD code of main window value
6th BYTE:
BCD code of month.
7th BYTE:
BCD code of day.
8th BYTE:
BCD code of hours.
9th BYTE:
BCD code of minute.
10th BYTE:
End byte, its value is 3, 1st and 10th are used
to check frame error.
