4
5
MEASUREMENT PROCEDURE
Setting the Clock
1. Press the green on/off button and
MAX/MIN
button
simultaneously, release.
2. The meter will show
SEL
.
3. Press the
CLOCK
button to select the year, month, day, hour
and minute (in that order).
4. To set the year, month, day, hour and minute, press the ▲ button
to increase the number and the ▼ button to decrease the number.
5. Press the
CLOCK
button again to exit clock setup.
6. To cancel the setup process at any time, press the power button
to turn the meter off.
Taking Measurements
1. Press the
POWER
button to turn the unit on. The amount of
available memory space will be displayed.
2. Plug the thermocouple plug into the meter.
3. The meter will default to the temperature scale last used. Press
the °
C/°F
button to change the temperature scale, if necessary.
4. Begin taking temperature readings.
5. Press the
HOLD
button to freeze the temperature reading. H
will be displayed.
Note...
When the data hold function is active, the
REL
,
MAX/MIN
, and
°C/°F
buttons will be disabled. If you press these buttons, two
beeps will sound.
6. To resume measurement, press the HOLD button again.
7. To cancel setup process at any time without saving the
changes, press the power button to turn the meter off.
Recording Data
Each time you use the
REC
button to record data, a data set will
be stored in the memory. Up to 16241 records can be stored.
1. Press the
REC
button to begin recording data.
2. To stop recording data, press the
REC
button again.
