manualshive.com logo in svg

Sper scientific 800052, Instruction Manual

Share
Download
Sper scientific 800052 Instruction Manual Download Page 22

22

Sampling and Recording in Immediate Mode 

 

1.  The recording icon will display. Disconnect the USB cable 

from the computer and meter. Recording will continue.

2. Place the meter in the desired location for sampling.

3.  The datalogger will record up to 32,000 data points. Once 

the memory is full, recording will stop.

Sampling and Recording in Key Start Mode

1. Disconnect the USB cable from the computer and meter. 
2.  Place the meter in the desired location for sampling. 

Press 

BKLT

 for several seconds to begin recording. The 

recording icon will display.

3.  The datalogger will record up to 32,000 data points. Press 

BKLT

 for several seconds to stop recording.

Sampling and Recording in Roll Over Mode

1.  The recording icon will display. Disconnect the USB cable 

from the computer and meter. Recording will continue.

2. Place the meter in the desired location for sampling.

3.  The datalogger will record up to 32,000 data points. When 

the memory is full, the meter will continue recording over 

the oldest records.

Summary of Contents for 800052





























Reviews:

No comments

Brands by name

Popular brands

Load more brands