16
4. The USB Data Logger Monitor screen displays.
Note…
The meter should be plugged into the USB port before the
software is opened.
If the meter is not plugged into the correct port, an error message
will appear. Make sure that the meter is plugged in correctly.
DATALOGGER SETTINGS
To Access Setting Options:
•
Select “Setting” from the header options on the upper left-
hand side of the USB Data Logger Monitor screen. “Comm.
Port” and “Log Setting” options appear in a drop-down menu.
Communication (Comm.) Port Setting
1. Select “Comm. Port” from the Setting options. The Comm.
Port Setting Menu displays.
2. The menu displays the port number, baud rate, data bits,
parity, and stop bits. Select the correct port number.
3. Click “OK” to finish.
