19
3. The default alarm value of 0.08 ppm displays. Adjust the
▲ or ▼ indicators to change the value. Alternatively, click
on the field and type in the new value. Continue by setting
the logger sampling parameters, below.
Logger Sampling Setting
1. Select the “Setting” tab.
2. The meter sampling range is
1 second ~ 6:59:59. Adjust the ▲ or ▼
indicators to specify the sampling rate
in hours, minutes, and seconds.
3. Adjust the ▲ or ▼ indicators to select
Immediate, Key Start, Roll Over, Schedule,
or Real Time Start Mode.
Setting Immediate Start Mode
This option will cause the meter to begin taking readings as
soon as the option is confirmed. Reading will continue when
the meter is detached from the USB port.
a. Adjust the ▲ or ▼ indicators to specify the number of
sample points, in thousands, from 1000 ~ 32,000.
b. Adjust the ▲ or ▼ indicators to toggle between units: °C or °F.
c. Select “Ok” to save the settings and exit the menu, or
“Cancel” to exit without saving the new settings.
