- 7-
4. ADVANCED AJUSTMENT PROCEDURES
Press the
SET
button (8) for at least two seconds to enter the advanced
adjustment procedures. Press the
ESC
(3) button to exit.
A. Check Remaining Available of Data Points
Press the
SET
button (8) at least 2 seconds until the lower display shows:
"
XXXXX" is the number of free data points.
B. Clear Memory
Press the
SET
button (8) as needed to reach the
"clear memory" screen. The number of saved
data points is displayed. To delete saved data
from memory, press the
ENTER
button (4) once,
then press
ENTER
button (4) again to confirm your action. The display
shows: "0 Ok ESC:Quit".
If you DO NOT want to clear the memory, press the
SET
button (8) to
advance to the next option, or press the
ESC
button (3) to exit.
C. Date/Time Setting
Press the
SET
button (8) as needed to reach the
"date/time set" screen. Use the
▲
UP
(5),
▼
DOWN
(6), and
ENTER
(4) buttons to
select the year, month, date, hours, minutes and seconds.
D. Sample Time Setting
Press the
SET
button (8) as needed to reach the
"sample time" screen. Use the
▲
UP
(5),
▼
DOWN
(6), and
ENTER
(4) buttons to
select the sample time (hour-min-sec). Press the
ENTER
button (4), then press the
ESC
button (3) to save the setting and
exit this function.
E. Auto Power Off Default Setting
The meter will automatic shut off after approxi-
mately 10 minutes without activity. Press the
SET
button (8) as needed to reach the "auto
power off" screen. Use the
▲
UP
(5) and
▼
DOWN
(6) buttons to enable /
disable this feature. Press the
ENTER
button (4), then press the
ESC
but-
ton (3) to save the setting and exit this function.
1 = Auto Power Off - Enabled
0 = Auto Power Off - Disabled
XXXXX Memory Space
Before executing the advanced adjustment procedures,
exit the HOLD and RECORD functions.
Clear Memory
Esc:N Enter:Y
06:01:03 Date/Time Set
y-m-d ^, v ENTER
(
→
)
00:00:02 Sample Time
h-m-s ^, v ENTER(
→
)
107
