26
Fastening without external fixing brackets
You need the following for fastening the charging station:
4 screws (diameter maximum 6 mm, screw head at least 8.5 mm, maximum 10.5 mm)
4 matching dowels
►
Mark the fixing points (Abb. 4).
►
Unscrew the housing cover.
►
Using the screwdriver, lever out the threaded inserts (Abb. 5 and Abb. 6).
►
Drill holes for the fixing points.
►
Push the dowel into the holes.
►
►
Screw the charging station tight by screwing one screw each through the boreholes (Abb. 7).
►
Mount the threaded inserts (Abb. 8 and Abb. 9). The lettering “TOP“ must point to the housing cover.
►
Screw on the housing cover of the charging station.
Figure 4:
Fixing points
Figure 5:
Lever out the threaded insert
(corner)
Figure 6:
Lever out the threaded insert
(side)
Figure 7:
Mount the charging station
on the wall
Figure 8:
Mount the threaded insert
(corner)
Figure 9:
Mount the threaded insert
(side)
Summary of Contents for BCS Pure
Page 7: ...7 Abb 3 Abstände Wandmontage in mm Montagemaße in mm 1400 min 700 min 700 min ...
Page 38: ...38 ...
Page 39: ...39 ...
