34
Cleaning
Achtung
Incorrect cleaning agent can damage the charging station.
►
Do not use sharp or hard equipment for cleaning.
►
Clean the charging station and the connector using a sift dry cloth.
►
Disconnect the charging station from the 230 V power supply.
►
Protect the charging station against switching back on.
►
Clean charging station with a soft moist cloth.
Maintenance
►
Check the signs for legibility (visual check). Replace illegible signs immediately.
►
Check the charging station and its components for damage, wear and their functions at regular intervals.
►
Remedy defects such as defective connections, damaged cable and worn or corroded connectors.
►
Before opening the housing cover of the BCS SMART, please switch on the maintenance mode in the BCS
Portal in order to deactivate the sabotage warning per e-mail. All functions remain active.
The maintenance mode itself is ended after 4 hours. Otherwise reset the mode in the portal.
Hinweis
To ensure for correct operation, use only original spare parts from Spelsberg
(contact data, see last page).
invite other users
In the organisation, a user can invite other users with the same rights.
For this purpose, proceed as follows:
►
Login to the BCS PORTAL with your access data
►
Change to the view “Organisation”
►
Add a new user by specifying the respective e-mail addresses.
The new user receives an invitation by e-mail.
Note:
the invitation link is valid for 48 hours. Then the organisation is added.
Note:
each user of an organisation has the same rights - can operate the station and add other users.
A user can delete their user account (Profile
Settings).
A user can delete another user from the organisation (Organisation
Delete user).
If the last user of an organisation has been deleted, the organisation is deleted.
Charging stations allocated are then released again. To be able to manage this charging station again using
the BCS PORTAL, the charging station must be added to the organisation again.
Replacing the microfuse
Warnung
Danger to life due to electric shock
When working on the electric components of the bicycle charging station,
there is a risk of electric shock.
►
Have work on the electrical components carried out only by a locally approved qualified
electrician.
Summary of Contents for BCS Pure
Page 7: ...7 Abb 3 Abstände Wandmontage in mm Montagemaße in mm 1400 min 700 min 700 min ...
Page 38: ...38 ...
Page 39: ...39 ...
