118150-001 REV. B
Page 59 of 66
4.15.9 Enable Watchdog <28>
Description:
It enables the communication watchdog and sets the timeout delay. If no
message is received during the timeout period, high voltage will be shut
down and a watchdog fault will be declared. Enter timeout delays from 1
to 10 seconds. A value of zero disables the watchdog operation.
The default timeout is 5 seconds. This command is password protected
and the userconfig command must be sent first.
Direction:
Host to supply
Syntax:
<STX><28><,><ARG><,><ETX>
Where <ARG> = 1-10 seconds
0: Watchdog disabled
Response:
<STX><28><,><ARG><,><ETX>
Where:
<ARG>= $ or error code.
Error Codes: 1 = receive error, 2 = unrecognized command
