118150-001 REV. B
Page 31 of 66
and the XRB011 board, and the second is through the use of a switch,
hub, or network.
A direct connection requires a non-standard cable where the wires are not
run straight through. Please refer to the two cable ends shown below in
figure 4.
Figure 4
– Crossover Cable for Direct Connection
A standard connection through a hub, switch, or network uses a standard
CAT5 patch cable. Please refer to the two cable ends shown below in
figure 5.
Figure 5
– Standard Straight Through Cable – Standard CAT5 Patch
1
1
1
1
