27
SPEKTRUM NX6 • TRANSMITTER INSTRUCTION MANUAL
EN
Calibrating the Transmitter
1. Carefully move the gimbal sticks in a + shape moving from
left to right, then up and down. Press gently on the gimbals
at the stops to achieve an accurate calibration. Return both
gimbal sticks to the center position.
2. Select SAVE to store the calibration.
The Calibration screen stores the potentiometer endpoints for all
proportional controls. It is mandatory to complete the calibration
after changing the stick mode selection.
SYSTEM SETUP
Calibrate
Factory Reset:
Select this option to reset the NX6 back to factory settings.
Choosing this option will wipe out any settings and all models
that have been set in the NX6 programming.
WiFi Utilities
USB Settings
The USB port may be used at any time to charge the battery, but
to connect to the internal memory, you will need to observe the
following steps.
1. Connect your micro USB cable to the micro USB connector
located on the back of the NX6.
2. Enter the Function menu and Scroll to the bottom to access the
System menu.
3. Scroll down and select USB Settings.
4. Select Access Internal Storage.
5. Transfer your files between the NX6 and your PC as needed.
6. Click back or the roller to exit and resume normal operation.
First start an account at SpektrumRC.com first on your PC, Mac, or
mobile device.
1. Select WiFi Utilities. The NX6 will search for WiFi networks in
range and display the options for you to connect with.
2. Select your WiFi connection. Load the SSID and password for
connection and select Connect.
3. Select Log In and fill in your account information.
4. Select Check For Updates to check for the newest updates on
your NX6, and download them automatically.
5. If you wish to erase your registration information from your NX6
you may do so. Otherwise, select Log Out to resume normal
operation.
