13
SPEKTRUM DX5• TRANSMITTER INSTRUCTION MANUAL
EN
MENU
TELEMETRY
The telemetry screen allows for easy access to all telemetry sensors
and settings.
To edit telemetry sensors:
1.
Select the sensor from the list.
2.
Press OK to open that sensors settings.
3.
Adjust sensor parameters.
4.
Press OK to save the selection.
Settings:
Chose how telemetry is displayed on the transmitter.
File Settings:
•
Displays File name of saved telemetry fi les.
•
Inhibit, activate telemetry fi le saving.
Telemetry
1:RPM/SPEED
2:Temperature
3:Empty
4:Empty
5:Empty
6:Rx V
7:RF Quality
Settings
LIST
NEXT
RPM/SPEED
Display:Act
Min Alarm:
0 RPM
Inh
Max Alarm:
10000 RPM
Inh
BACK
SMART Throttle*:
The new line of Spektrum ESCs feature a telemetry function called SMART Throttle. SMART Throttle uses
technology combines the throttle signal with telemetry data from the ESC on one normal three wire servo
connector.
SMART Throttle ESCs can send current, voltage, ESC temp, and mAh consumed. They can also pass along battery
data from compatible Spektrum SMART batteries. SMART Throttle telemetry data shows up on your transmitter like
any other telemetry sensor. Select the preconfi gured settings for SMART Throttle with the selection called SMART
Throttle in the telemetry sensor menu. This option will load all of the sensors available with SMART Throttle into the
sensor display setup. Alternatively telemetry values may be confi gured individually for display.
For SMART Throttle to function you must have a compatible Spektrum ESC, and telemetry receiver to pair with
your DX5C. Only certain Spektrum products include SMART technology compatibility, check your receiver and ESC
manual for more information.
To activate SMART Telemetry:
1.
Open the tememetry screen and select an empty fi eld elect the sensor from the list.
2.
Scroll to SMART ESC to activate SMART ESC data.
3.
Scroll to another empty feild and scroll to select SMART Battery data.
4.
Scroll to another empty feild and scroll to select RPM/SPEED to see speed information. Add motor pole count and rollout to see
Speed.
When the radio is on and connected to a receiver sending SMART Data, the SMART Logo will appear under the battery logo on
the home page and a signal bar will appear in the top left corner of the screen. Scrolling down, past the servo monitor, the SMART
screens will appear. Select either ESC, battery, or both for display to suit your preference.