Speidel’s Master Brewer
Page 4 of 26
3
Working with the Master Brewer
3.1
Advice about safety
Caution: danger of burning!
The container, lid and fittings become very hot.
The boiler contains boiling wort at the end of the brewing process. Follow the advice
about installation. Never move the Master Brewer when it is in a hot condition.
Keep children away. You should always use oven cloths or gloves when working on
and with the Master Brewer.
Caution: danger of condensation!
Take care when lifting the lid that the condensed
water on its underside runs back into the container. Hold the lid obliquely over the
container accordingly.
Caution: electricity!
Only carry out cleaning work on the Master Brewer when the
plug has been pulled out of the mains socket outlet (separated from the mains power
supply). Avoid overloading the electrical fuse. Do not connect any other appliance
with a high electrical rating to the same fuse because the Master Brewer has a high
consumption of electricity. Important: for operation of the control unit, the plug
connections on the rear side (pump and heating) of the unit must be locked at all times.
Operating the unit without the plug connections locked will create the danger of
overheating, damage to the Master Brewer and danger to the user.
3.2
Advice about the temperature control unit
Automatic operation: Start by pressing START (1 sec). A comprehensive description
is given in the following chapter “Brewing with the Master
Brewer”.
Programming module: The programming module is accessed by pressing the ENTER
button (1 sec). A comprehensive description is also given in
the following chapter “Brewing with the Master Brewer”.
Manual operation:
Press
↓
(1sec) to switch to manual operation of the Master
Brewer. The heating (H) is switched on/off by pressing
START. Pressing ENTER also activates the pump (P). The
temperature can be set by means of the arrow buttons.
Display
ENTER
•
Switch to programming mode (1 sec)
•
Confirmation of values in programming
mode
•
Technology of requests in automatic
operation
•
Pump On/Off in manual operation
LED heating
LED pump
START
•
Start automatic brewing (1 sec)
•
Confirmation but within the brewing process
•
Heating On/Off in manual operation
UP ARROW
•
Increase time / temperature in
programming mode and in
manual operation
•
Language settings (3 sec)
•
Up + down arrows = Stop
automatic or return from manual
operation
DOWN ARROW
•
Reduce time / temperature in programming mode and in
manual operation
•
Switch to manual operation (1sec)
•
Up + down arrows = Stop automatic or return from
manual operation
!
