Speidel’s Master Brewer
Page 24 of 26
Open the pump:
It should be possible to open the pump housing
by hand. If it is not, you should use a small block
of wood and a hammer to release the union-nut.
In the interior of the pump, the impeller wheel will
now be visible.
Caution:
- the pump impeller may fall out!
- damage to the impeller wheel will cause the
pump to stop working properly later on!
The impeller wheel is taken out of the housing for
cleaning.
Any brewing sediments must not be allowed to block the
holes and must therefore be removed carefully.
The pump housing should also be carefully cleaned.
After this, replace the impeller wheel carefully in the
housing.
Finally, to secure the pump once more, the union
nut should only be tightened by hand.
Accessories: Cleaning set (item No.: 78027)
