Speedtouch 780 WL, Installation And Setup Manual

Page: 30 / 52

24
E-DOC-CTC-20060209-0004 v1.0
Chapter 2
Basic Installation
2.4.2 Wireless Setup
Wireless client
adapters
If you want a wireless connection to your Wi-Fi certified SpeedTouch™, you need a
wireless 802.11 b/g compatible client adapter.
You can use one of the following wireless client adapters:
SpeedTouch™110g CardBus
SpeedTouch™121g USB adapter
Any other Wi-Fi certified WLAN client
A built-in Wi-Fi certified WLAN adapter, if present in you computer
Installing your wireless
client adapter
Proceed as follows when the Home Install Wizard prompts you to plug in the
wireless client adapter:
1
Plug in the wireless client adapter. The hardware is being installed.
2
Enter your SpeedTouch™’s serial number and click Next .
A progress window appears, showing the setup of the wireless connection to
your SpeedTouch™.
3
Continue with ”Configuring the Internet connection” on page 13 .
To install hardware on a Microsoft Windows 2000 or a Microsoft Windows
XP operating system, you need administrative rights on your computer.
If you use a SpeedTouch™ wireless networking adapter, the
SpeedTouch™ Wireless Client Manager, an alternative to the Wireless
Zero Configuration (WZC) in Windows XP, will be installed. If you are
working on Windows XP and prefer to work with the WZC, see
”Restoring Windows Zero Configuration” on page 41 to switch back to
WZC.
Your SpeedTouch™’s serial number is a 13-digit key printed on the
bottom label of your SpeedTouch™.