Speedtouch 780 WL, Installation And Setup Manual

Page: 19 / 52

13
E-DOC-CTC-20060209-0004 v1.0
Chapter 2
Basic Installation
Configuring the Internet
connection
Proceed as follows:
1
If prompted, enter the User name and Password for your SpeedTouch™
security settings and click OK .
2
Select the appropriate Region , Provider and Service for your Internet
connection as specified by your Internet Service Provider and click Next.
3
Your connection to the Internet connectivity is set up:
Select the VPI/VCI - and, if required, the Connection Type - as specified
by your Internet Service Provider and click Next .
Enter the User Name and Password for your Internet account settings as
specified by your Internet Service Provider and click Next .
4
The procedure continues with some additional configurations.
Proceed with “ Configuring the SpeedTouch™ (and your computer)” on
page 14 .
The factory default user is ‘Administrator’ and its password is blank. It
is advisable to specify another user name and password during the
configuration procedure to protect your SpeedTouch™ from security
violation. See
“2.5 Basic Security” on page 27 for more information.
If the Internet Service Provider has included a separate disk with a
dedicated service profile, click
Have Disk to browse to the location of
the appropriate service profile template file.
!
From here on, the procedure might differ from the description below.
The requested information will depend on the selected service profile
and should be provided by your Internet Service Provider. Subsequent
screens will guide you through the configuration of both the
SpeedTouch™ and your computer. Enter the requested information
and click
Next whenever requested.