Speedfit JGSTAT2B, Instruction Manual

Page: 4 / 76

Emergency.
Switch off the voltage
to the individual thermostat, wiring
centre or complete system.
Sources of danger.
The
thermostat must be disconnected
from mains supply before removing
the cover.
For the installer. Please enter
any parameter changes in the
Installer Notes section (pages 72
- 75).
Installer parameter
settings.
The Aura JGSTAT2
is equipped with an Installer
Parameter section (see page
40). This must only be entered
by the installer or a competent
person.
Changing these
parameters can have a serious
effect on your heating system.
230v AC
Warning.
This product must be
fitted by a competent person.
Installation must comply with the
guidance, standards and
regulations applicable to the
location where the product is
installed. Failure to comply with the
requirements of the relevant
guidance,
standards and
regulations could lead to injury,
death or prosecution.
These instructions are applicable to the
Speedfit Aura model stated on the front cover
of this Instruction Manual only.
Warning.
Always isolate the
AC Mains supply before
installing or working on any
components that require 230v
AC 50Hz supply.
04 JGSTAT2 Instruction Manual
Product Compliance & Safety Information