background image

-17-

803235

© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT

Liquid Bleach Compartment

The bleach compartment is located in the left front 
corner of the dispenser drawer. Refer to 
compartment 2 of illustration. It has been 
designed to prevent the dispensing of undiluted 
bleach onto the clothes load.

Use liquid bleach in the dispenser. 

Powdered bleach 

must not be used in this compartment. Powdered 
bleach can be used in the detergent compartment 
only and can be added along with the detergent.

DO NOT use more than the maximum level 
indicated for the bleach compartment.

 Adding 

more than the maximum amount could result in 
early dispensing of the product and possible 
damage to fabrics. 

Carefully pour recommended amount of bleach into 
the compartment before starting wash load.

Be careful not to spill undiluted bleach. It is a 
strong chemical and can damage some fabrics if it 
is not properly diluted. Follow bleach 
manufacturer’s label for proper use.

Carefully close dispenser door. Do not allow bleach 
to spill into other compartments.

Fabric Softener Compartment

The fabric softener compartment is located in the 
left rear corner of the dispenser drawer. Refer to 
compartment 3 of illustration.

Use no more than the maximum level indicated for 
the fabric softener compartment. Adding more 
than the maximum amount could result in early 
dispensing of the product and possible staining of 
fabrics.

Add fabric softener to compartment before 
beginning wash load. The fabric softener will be 
dispensed during the last rinse cycle.

Carefully close dispenser door. Do not allow 
softener to spill into other compartments.

To Clean the Dispenser

Pour hot water into the dispenser drawer, making 
sure it flushes through each compartment. Use a 
small brush to thoroughly clean out any residue.

It is not necessary to remove the dispenser drawer 
for normal maintenance. If the dispenser drawer 
needs to be removed for any reason, use dispenser 
drawer removal tool, Part No. 318P4, to avoid 
damage to the drawer. 

Summary of Contents for 803235R2


























Reviews: