-11-
803235
© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
4. Close the loading door tightly. The washer will
not operate with the loading door open.
5. Set WASH/RINSE temperatures.
There are four WASH/RINSE temperatures
available – Hot Wash/Cold Rinse, Warm Wash/Warm
Rinse, Warm Wash/Cold Rinse, Cold Wash/Cold
Rinse.
The Energy Saver settings, marked with an asterisk
(*), show which temperature settings will use the
least energy.
Refer to the
Water Temperature
section for the
temperature that works best for your garments.
6. Select EXTRA RINSE if desired.
The extra rinse control is useful for detergent
sensitive skin. By turning the EXTRA RINSE knob to
ON, the REGULAR, PERM PRESS, and DELICATES/
BULKY cycles will each provide an additional rinse. If
the rinse is desired, turn the knob to ON. When the
extra rinse is not wanted, OFF should be selected.
7. Select the cycle according to the type of
fabric being washed. Use the indented line on
the cycle selector knob as a guide.
8. Turn the START knob to the right to start the
washer. The DOOR light will come on after a
short delay, water fill will begin, and wash drum
will begin tumbling.
NOTE: Washer door MUST be closed tightly to
start washer.
If items need to be added or removed after a cycle
has started, turn the cycle selector knob to the
OFF position. Wait until the DOOR light goes off
(approximately 45 seconds after cycle has been
stopped), open door, add or remove items, and
start the cycle again.
FLW2219N
FLW2171N
To reduce the risk of serious injury, do
not bypass the loading door switch by
permitting the washer to tumble or spin
with the loading door open.
W095
WA R N I N G
WA R N I N G
Window may be hot in the Hot Wash
Cycle.
W326
FLW2220N
