Guide for HD5 Assembly
OPSMN011 Rev 3
Dated: 29.06.2022
16
Step 5:
Using 3 M4x10 bolts attach the PIR to the front of the door; it will be necessary to make a hole in the sticker
where it covers the hole. Before placing the cover on the PIR ensure that the PIR is facing forward and it is
angled 45 degrees, pointing down. To
secure the cover place it over the PIR
and tighten the screw.
Step 6:
On the back of the door, place a 5mm grommet over the PIR cable and insert it in the hole at the bottom of
the cable.
