Spectrum RAC2V1A User Manual Download Page 41

Page: 41 / 93

Router Configuration Screen Descriptions

RAC2V1A Router User Guide

NAT

NAT Mode

Select the NAT Mode.

•

RoutedwithNAT: Data will be routed by the
device and all the outgoing packets will be
NATed.

•

RoutedwithoutNAT: Data will be routed by the
device but all the outgoing packets will not be
NATed.

•

Bridged: Data will pass through the device
directly without any routing and without NAT.

UPnP

Enable UPnP

Click this checkbox to enable UPnP (Universal Plug
and Play) on the system.

Advertisement
Period

Specify how often (in minutes) the router should
advertise its UPnP information. The default is 30
minutes.

Advertisement
Time To Live

Enter the maximum number of hops that each UPnP
packet can be sent before it is disregarded. The
default value is 4, which should be acceptable for
most home networks.

IGMP Proxy

Enable IGMP
Proxy

Click this checkbox to enable the IGMP (Internet
Group Management Protocol) proxy on the system.

Summary of Contents for RAC2V1A






























































































Search results

Summary of Contents for RAC2V1A

Reviews:

Related manuals for RAC2V1A

Brands by name

Popular brands

Spectrum RAC2V1A, User Manual

Search results

Summary of Contents for RAC2V1A

Reviews:

Related manuals for RAC2V1A

Brands by name

Popular brands