Router Configuration Screen Descriptions
RAC2V1A Router User Guide
51
Wireless 2.4 GHz/Wireless 5 GHz
Beacon Interval
Sets the time interval between beacon
transmissions in milliseconds. The router uses these
transmissions to synchronize the wireless network
and its client devices. For compliance with most
client devices, the Beacon Interval should remain
set at the default of 100ms. The allowable setting
range is from 20 to 1024ms.
DTIM Interval
Sets the DTIM (Delivery Traffic Indication Message)
Interval. The DTIM Interval informs the wireless
client devices of the next available window for
listening to broadcast and multicast messages.
When the router sends a DTIM beacon, the client
devices hear the beacon and then listen for the
messages. For compliance with most client devices,
the DTIM Interval should be left at 1 ms. The
allowable setting range is from 1 to 255 ms.
RTS Threshold
Sets the packet size limit. When the threshold is
passed, the ready to send/clear to send (RTS/CTS)
function is invoked. The default setting is 2347
bytes. The allowable setting range is from 1 to 2347
bytes.
Guard Interval
The spacing between transmission of symbols. Can
be set to short or long. Select short to provide
higher throughput in networks where the coverage
distance is small (indoors). Select long to provide
higher throughput in networks where the coverage
distance is large (outdoors).
Dynamic Channel
Selection
Click the checkbox if you want this radio to
periodically monitor the frequency band for
channels that have less traffic than the one in use. If
a less congested channel is available, Dynamic
Channel Selection allows the radio to make an
unsolicited channel change.
Summary of Contents for RAC2V1A
Page 1: ...C2V1A Router User Guide 1 User Guide Model Number RAC2V1A 802 11ac Wave 2 Rou ter ...
Page 46: ...Router Configuration Screen Descriptions RAC2V1A Router User Guide 46 Wireless Basic Setup ...
Page 56: ...Router Configuration Screen Descriptions RAC2V1A Router User Guide 56 QoS Classification ...
