Spectrum DX8G2 Instruction Manual Download Page 28

Page: 28 / 53

SPEKTRUM DX8G2 • TRANSMITTER INSTRUCTION MANUAL

The Serial Number screen displays the transmitter serial number

and AirWare software version.

Reference the Serial Number screen any time you need to register

your transmitter or update the AirWare software from the Spektrum

Community website.

The transmitter AirWare software version appears between

and

at the bottom of the Serial Number screen. Register

your DX8 to get AirWare software updates and other news at

spektrumrc.com

IMPORTANT:

AirWare files are specific to the transmitter

serial number and you cannot transfer AirWare files between

transmitters, ie., downloading an AirWare software update once

and attempting to install it on multiple transmitters.

Calibrating the Transmitter

1. Carefully move the gimbal sticks in a + shape moving from left

to right, then up and down. Press gently on the gimbals at the

stops to achieve an accurate calibration. Return both gimbal

sticks to the center position.

2. Select SAVE to store the calibration.

You may find it helpful to export the transmitter serial number to a

text file for your personal records or when you are registering the

transmitter on the Spektrum Community.

To export the transmitter serial number:

1. Insert an SD Card in the card slot on the transmitter.
2. Scroll to

EXPORT

and press the scroll wheel. The SD Status

screen appears and should display MY_DX8.xml in the middle

of the screen.

3. Press the scroll wheel again to return to the Serial Number

screen.

4. Power off the transmitter and remove the SD Card from the

transmitter.

5. Install the SD Card in a card reader connected to your

computer.

6. Open the MY_DX8.xml file from the SD Card location. You

can then copy and paste the serial number into your personal

records or to the Spektrum Community website.

The Calibration screen stores the potentiometer endpoints for all

proportional controls. It is mandatory to complete the calibration

after changing the stick mode selection.

SYSTEM SETUP



Serial Number



Exporting the Serial Number to the SD Card



Locating the Transmitter AirWare Software Version



Calibrate

Summary of Contents for DX8G2






















































Search results

Summary of Contents for DX8G2

Reviews:

Related manuals for DX8G2

Brands by name

Popular brands

Spectrum DX8G2, Instruction Manual

Search results

Summary of Contents for DX8G2

Reviews:

Related manuals for DX8G2

Brands by name

Popular brands