Spectrum DX3, Manual

Page: 24 / 40

24
The Travel Adjust feature of the DX3 allows the maximum travel of both the steering, throttle
and Channel 3 (optional) servos to be increased or decreased in each direction to achieve
the exact servo movement needed. The adjustment range is from 0 % to 125%. The travel
adjustment is factory set to 100% for both channels. The travel adjustment value displayed
on the screen depends on the current position of the steering wheel, trigger, or trim lever to
be adjusted. This feature is very useful either to maximize servo travel or to reduce servo
over-travel to eliminate servo binding (servo moves further than control mechanism allows),
without the need for mechanical linkage adjustment.
The screens below are accessed by turning the wheel to the desired direction to be adjusted
(left or right), by moving the trigger to the forward or backward (brake) position, or by
moving the Grip Lever A to the forward or back positions.
Channel 3 Screens (Optional)
Travel Adjust
(Function Mode)
stl
100
TRV ADJ.
str
100
TRV ADJ.
fwd
100
TRV ADJ.
f3+
100
TRV ADJ.
f3-
100
TRV ADJ.
Indicates Steering Left travel adjustment
Indicates current
value
Indicates Steering Right travel adjustment
Indicates current
value
Indicates Forward Throttle travel adjustment
Indicates current
value
Indicates left/right travel adjustment (function
LN), or forward travel adjustment (function 3P)
accessable through Grip Dial A
Indicates current
value
Indicates current
value
Indicates rearward travel adjustment
(function 3P) accessible through Grip Dial A
–
–
–