4
Servo Reversing
MODE
CHANNEL
ENTER
SYSTEM
1. With the transmitter power switch on, press the
MODE
key to enter the Function Mode.
MODE
ENTER
SYSTEM
2. Press the
MODE
key until ST REV.NORM appears on the screen. The ST REV.NORM
indicates the steering servo reversing screen.
INCREASE
DECREASE
CLEAR
DIRECT
+
–
3. Press the
INCREASE
or
DECREASE
key to move the cursor to the desired servo
direction (REV.NORM).
CHANNEL
ENTER
SYSTEM
4. Press the
CHANNEL
key once to access the throttle servo reversing screen.
5. To select the direction of the throttle servo, repeat Step 3 above.
6. Repeat Steps 2 and 3 to adjust channel 3 if needed.
DX3 Quick
Start Setup
(continued)
st
REV • NORM
–
Indicates Current Channel
ST = Steering
TH = Throttle
FN3 = Channel 3 (optional)
Indicates Current Servo Direction
–
Summary of Contents for DX3
