Spectrum 1734, User Manual

Page: 31 / 78

Chapter 3: Configuring the Module 3-7
User’s Manual Pub. 0300272-03 Rev. B
13. The Select Major Revision dialog appears. Enter or select Major
Revision value and click
OK :
14. Configure the remote Ethernet communication module as follows, and
then click
OK .
The following New Module dialog appears:
15. View or specify the following options:
•
Name . Enter name of new module.
•
Description . If needed, enter a description for the module.
•
Comm Format . Select the communication format. For the 1734
AENT, Ethernet Adapter module, select Rack Optimization .
This selection limits data to the basic status and input data in
order to optimize the number of connections via a
Rack
Connection .
•
Slot . Not editable. Shows the slot number in which the module
resides.
•
Chassis Size . Enter the size of the chassis in which the adapter
resides.
•
Address/Host Name . Choose whether to enter the specific IP
address or Host Name of the module.
•
Electronic Keying . From the pull down menu, choose the
keying option you wish to use for this module. Electronic
Keying options are described earlier in this chapter.