Spectrum Technologies FieldScout TDR 300 Product Manual Download Page 31

Page: 31 / 32

The meter is not logging any data.

The meter is shipped with the data logger disabled. It must be

enabled in the Meter Settings screen (p. 16).

My Average reading suddenly went to 0%.

The average is only calculated for a maximum of 65 readings.

If additional readings are taken, the LCD will display a value of

0% for the average. Press and hold the DELETE/CLR AVG

button (p. 9) to return to normal operating mode.

My LCD is stuck at N = 250.

250 is the maximum number the LCD will display. At this

point, additional water content readings can be made, but the

index number (N value) will stay at 250. Press and hold the

DELETE/CLR AVG button (p. 9) to return to normal operating

mode.

’

m getting a

“

Memory Full

”

message.

The meter must be connected to Field Scout software to clear

the memory (see p. 15).

This product is warranted to be free from defects in material or

workmanship for one year from the date of purchase. During

the warranty period Spectrum will, at its option, either repair or

replace products that prove to be defective. This warranty does

not cover damage due to improper installation or use, lightning,

negligence, accident, or unauthorized modifications, or to inci-

dental or consequential damages beyond the Spectrum prod-

uct. Before returning a failed unit, you must obtain a Returned

Materials Authorization (RMA) from Spectrum. Spectrum is not

responsible for any package that is returned without a valid

RMA number or for the loss of the package by any shipping

company.

Warranty

Summary of Contents for FieldScout TDR 300

































Search results

Summary of Contents for FieldScout TDR 300

Reviews:

Related manuals for FieldScout TDR 300

Brands by name

Popular brands

Spectrum Technologies FieldScout TDR 300, Product Manual

Search results

Summary of Contents for FieldScout TDR 300

Reviews:

Related manuals for FieldScout TDR 300

Brands by name

Popular brands