5. With the loom removed, feed the monitor or all-in-one computer power cord through the
sliced opening of the loom to the bottom of the desk as shown.
Figure 4D
.
6. Re-attach the loom with the clips while providing enough slack in the loom to allow the
monitor column to fully extend and retract.
7. Secure the CPU / Ethernet cords to the bottom of the wiring tray with a zip tie if necessary.
8. Use additional zip ties to secure other cords as needed.
0110657R5 Page 7 of 11
iMac
®
or all-in-one
monitor
lift column
use tray slots to
weave and secure
excess cord
loom clip
wiring tray
power strip
(not included)
120VAC
power cord(s)
Figure 4D
