0110657R5 Page 5 of 11
Attach the VESA bracket to the all-in-one monitor
1. Lift the monitor column all the way up.
2. Position your monitor with the monitor column and align the VESA bracket mounting holes with the monitor
column holes. The top edge of the monitor should be positioned directly under, but not touching, the lift bracket.
3. Attach the VESA bracket / monitor to the monitor column with (4) 10-24 x 1/2” screws as shown in
Figure 3E
.
The monitor should be fully-supported while installing fasteners.
4. Tighten screws securely.
Attach monitor (iMac
®
or all-in-one monitor) to the Flex Insight XMS Desk
monitor
column
attached
VESA bracket
Figure 3E
front of iMac
®
10-24 x 1/2” SHCS
(4 req’d)
1. Attach the Spectrum VESA mount bracket to your all-in-one moni-
tor using (4) 4mm screws and instructions provided with the monitor.
Figure 3D
.
2. Tighten screws securely.
4mm screws
(not included)
Spectrum
VESA mount
bracket
Figure 3D
back of all-in-one
monitor
position the top edge of the iMac
®
or all-in-one monitor directly under,
but not touching the lift bracket
All-in-one monitor (installation option #2)
lift bracket
Spectrum VESA
mount bracket
included with desk
(formerly 38969)
