Figure 2
Ventilation fans
ventilation fan
1. Plug each ventilation fan into the 7-outlet power strip.
Figure 3
Note:
The fans should be plugged in and remain on whenever
stored laptops are powered ‘ON’ to dissipate the heat generated.
Attach cord wrap brackets
0116141 Page 4 of 11
1. Attach the cord wrap brackets to one of the side panels with 1/4-20 x
15mm JC bolts as shown in
Figure 2
and tighten securely. Be sure the
brackets are facing away from each other as shown.
2. Route the cycle timer cord through the side panel grommet as shown.
3. Wrap excess cord around the brackets as necessary.
side panel
4mm hex
wrench
(included)
Tools
Required
power cord from
cycle timer
side panel
grommet
cord wrap bracket attached with
(2) 1/4-20 x 15mm JC bolts
cord wrap bracket attached with
(2) 1/4-20 x 15mm JC bolts
