1. Unpack & detach from pallet
Assembly / Setup
0115700R2 Page 3 of 17
Install legs (fixed leg version only)
4. Remove side panels.
5. Attach each fixed leg to the table core with
(6) 1/4-20 x 5/8” PHM screws.
Figure 1C
.
Figure 1A
Figure 1C
pallet
table core
(set-and-go
legs shown)
Phillips
screwdriver
Tools Required
Cordless drill
with long magnetic
Phillips driver
or
(best)
1. Remove outer sleeve.
Figure 1A
.
2. Unscrew the (8) Phillips head wood screws securing the table core to the pallet.
Figure 1B
.
3. Without using a utility knife, open the rest of the boxes.
Figure 1B
wood
screw
fixed leg
fixed table
core
(4) 1/4-20 x
5/8” PHMS
(2) 1/4-20 x 5/8”
PHMS
(install from inside)
(2) 1/4-20 x 5/8”
PHMS
(install from inside)
fixed leg
