Chapter 3:
Configuring the Micro800 Expansion I/O 2085-O
X
32-SC Using CCW
3-5
User’s Manual Pub. 0300309-01 Rev. B
NOTE
You can directly control channel output through the CCW output variable
or your own ladder program. No default configuration is required. The
modules do NOT use the third-party, MCC tool for configuration.
5.
To view default configuration information, click the
Default
Configuration
tab:
The modules do not use the third-party, MCC tool for configuration.
2085-OX32-SC
Tab on CCW
Before you start, if needed, install the latest version of Rockwell Automation’s
Connected Components Workbench (CCW) Standard Edition.
NOTE
Using the Module Profile Tool to import the 2085-O
X
32-SC AOP into
CCW software is necessary only if you are using a CCW version earlier
than 11.00.00. For information on manually importing an AOP file, see
Appendix A. For Version 11.00.00 and later, the modules are already
available as a selection from the CCW Expansion Modules drop-down
menu:
