1-4
Chapter 1: Module Overview
User’s Manual Pub. 0300309-01 Rev. B
Output Description
Value
Heat Dissipation
OB32: 5.5 W maximum (at full load)
OV32: 4 W maximum (at full load)
Inrush current
Less than 150 mA at 5 V
Less than 400 mA at 24 V
RoHS
Meets European RoHS component standards (January 2015 and
earlier).
REACH
Meets European REACH 7 requirements.
Wire Installation
Wire size
#16 to #28 AWG
Wire Strip Length
0.375 in.
Recommended Tightening Torque
:
0.25 N-m (2.2 lb-in) (Use hand tool to tighten; see warning on
page 2-7 regarding risk of over-tightening.)
Module Dimensions
H×D×W
(With RTBs installed, RTB extends
the total depth approximately 2 mm
from 87 mm to 89 mm.)
110 mm × 89 mm × 51 mm.
(4.33 in × 3.54 in × 2.00 in)
90 mm × 89 mm × 44.5 mm
(excluding mounting feet, DIN rail latches, or the plastic that
extends into the adjacent module once installed).
(3.54 in × 3.5 in × 1.75 in)
Table 1-2. EMC Specification Table
Environmental Tests
Test Level Limits
Radiated Emissions
(Enclosure) Class A, 30 MHz – 1 GHz
Conducted Emissions
Group 1, Class A (AC Mains), 150 kHz – 30 MHz
ESD immunity
(Performance Criteria B)
6 kV Indirect (Coupling Plate)
6 kV Contact Discharge (to points of initial contact)
8 kV Air Discharge (to points of initial contact)
Radiated RF immunity
(Performance Criteria A)
10 V/M with 200 Hz sine-wave 50% Pulse 100% AM at 900
and at 1890 MHz
10 V/M with 1 kHz sine-wave 80% AM from 80…2000
MHz
10 V/M with 1 kHz sine-wave 80% AM from 2000…6000
MHz
EFT/B immunity
(Performance Criteria B)
Signal Ports:
± 2 kV at 5 kHz for 5 minutes, Criteria B
Power Ports:
± 2 kV at 5 kHz for 5 minutes, Criteria B
