Software Driver Installation
Windows Vista/7 32/64 Bit
(c) Spectrum GmbH
21
On the upcoming Windows security dialog select install. To pre-
vent Windows Vista/7 to always ask this question for future up-
dates, you can optionally select to always trust software from
Spctrum.
The hardware assistant then shows you the exact board type that has
been found like the MI.3120 in the example.
The drivers can be used directly after installation. It is not necessary to
restart the system. The installed drivers are linked in the device man-
ager.
Below you’ll see how to examine the driver version and how to update
the driver with a newer version.
Version control
If you want to check which driver version is installed
in the system this can be easily done in the device
manager. Therefore please start the device manager
from the control panel and show the properties of
the installed driver.
On the property page Windows Vista/7 shows the date and the version of the installed driv-
er.
After clicking the driver details button the detailed version information of the driver is shown.
In the case of a support question this information must be presented together with the board’s
serial number to the support team to help finding a fast solution.
Driver - Update
The driver update under Windows Vista/7 is exact the same procedure as the initial instal-
lation. Please follow the steps above, starting from the device manager, select the Spectrum card to be updated, right-click and select „Update
Driver Software...“ and follow the steps above.
