Install “
Spectronik Cerebral DCDC GUI
” on a PC.
The GUI loader icon will be on desktop screen after installation.
(Software can be downloaded from Spectronik website.)
Connect
the CEREBRAL-55
UART-Port
to the
PC
using the
USB-to-UART
cable.
At the UART connection, ensure correct orientation,
Black wire to “BLACK” locator.
CHAPTER 3 | OPERATING CEREBRAL-55
3.2 GETTING STARTED (GUI SETUP)
UART Port on
Control Board
UART Console of
USB-to-UART cable
Caution
The UART connector has a tight fit to provide a robust connection.
When connecting, ensure the UART console is fully inserted into the receiving port.
When disconnecting, firmly grip the sides of the console head and pull out.
You may jiggle it sideways but not up-down.
Do not pull by the wires.
